Firmendetails

  • Shijiazhuang dadao Packaging materials Co

  •  [Hebei,China]
  • Unternehmenstyp:Hersteller
  • Main Mark: Weltweit
  • Exporteur:51% - 60%
  • Zert:CE, MSDS, RoHS
  • Beschreibung:BOPP-Thermofilm,EVA-beschichtete Folie,BOPP-beschichtete Eva-Folie
Anfrage-Korb (0)

Shijiazhuang dadao Packaging materials Co

BOPP-Thermofilm

,EVA-beschichtete Folie,BOPP-beschichtete Eva-Folie

Home > Produkt-Liste > BOPP Laminierfolie > BOPP Thermal Film > Laminierfolie für Pappe

Laminierfolie für Pappe

Aufteilen:  
    Zahlungsart: L/C,T/T,Paypal,Western Union
    Incoterm: FOB,CFR,CIF
    Minimum der Bestellmenge: 500 Kilogram
    Lieferzeit: 20 Tage

Basisinformation

Modell: DD-LF23

Material: Laminiertes Material

Verwendung: Verpackungsfolie, Textil und Bekleidung, Geschenkverpackung, Industrie

Verarbeitungsart: Mehrfache Extrusion

Transparenz: Lichtdurchlässig

Feature: Feuchtigkeitsnachweis

Härte: Weich

Width: 300mm-2500mm

Treatment: Glossy,matt

Length: 3000m-18000m

Thickness: 12-50micron

Roll Core: 3inch,6inch

Samples: A4free Samples

Additional Info

Verpakung: pro Rolle mit Karton verpackt werden

Produktivität: 3000mt

Marke: DADAO

Transport: Ocean,Land,Air

Ort Von Zukunft: China

Versorgungsmaterial-Fähigkeit: 3000mt

Zertifikate : CE,SGS,ROHS

Produktbeschreibung

Laminierfolie für Pappe

Dieser Film wird für den Einsatz in Trockenlaminatoren empfohlen. Wenn die Folie im Nasslaminator verwendet wird, müssen kleine Anpassungen an der Maschine vorgenommen werden.



DECRIPTION OF PRODUCTS

 

Environmentally friendly

It is environmentally friendly, non-hazardous to health and safe to use as no toxic gases or volatile content is emitted. Safety in laminating process as no solvent based adhesive is used.

High function

Compared with other solvent lamination, our film is better in clarity and bonding. Strong ability of absorbing powder. It prevents lamination from being pressed, bubbled and shredded off easily. Matt thermal lamination film is good for spot UV and hot stamping.

Easy handing

It is easy to operate once the required temperature is met and no special technique required.

Efficient and energy-saving

Production cost is reduced substantially as there is no film wastage, mixture of adhesive solvent, and no UV heating lamp is required.

Process Parameter

Equipment for laminating film: dry and wet film laminator

Temperature: Normal:85~100°C

Special:100~110  °C

Roller pressure:10~18Mpa

Speed:8~50m/min

Remarks: Special laminations refer to those with thicker ink, solid color, high moisture content and bigger size paper.

Application manually

1. Adjust roller pressure and temperature according to different types of paper and ink.

2. When using the film for the first time or changing to other sizes, we recommend a small trial volume before going into fully mass lamination.

3. The following situation will affect the quality of the film during lamination.

1. When using metal ink.

2. When the ink contains too much wax, dried oil, adhesive, and silicon additive. etc.

3. When the ink is too thick.

4. When the ink is not completely dry.

5. When the paper contains too much moisture.

6. When there is too much powder.




Produktgruppe : BOPP Laminierfolie > BOPP Thermal Film

Mail an Lieferanten
  • *Fach:
  • *Nachrichten:
    Ihre Nachrichten muss zwischen 20-8000 Zeichen sein
Kontakt mit Lieferant?Lieferant
Susan Niu Ms. Susan Niu
Was kann ich für Sie tun?
Kontakten mit Lieferant